This wood case is CNC made with beech and walnut wood. There is brass screw stand into the case. Support ANSI ISO DIY Kit.

For walnut wood, the surface pattern is different because of the material.

PCB is pre-soldered with Kailh socket, there is the 4 most popular layout for your option.
The connector is Type C QMK firmware.

The aluminum plate is CNC sand blast then anodized.
The brass plate is CNC PVD brush finished.
The wood material is Beech wood.

The switch led can only support 2x3x4 square and 1.8mm butterfly, and you need to solder yourself.
To add switch LEDs, please solder switch led into PCB at first and then put on SMD switches, or it will affect hot swap functions.

Package Content

Wood Case + Aluminum Plate + Hot Swap PCB + Stabilizers needed + Rubber Feet + Switch puller

If you choose an Aluminum plate,beech wood is sent with a silver plate as default.
Walnut wood is sent with the black plate as default. (If you choose to the brass plate,then it’s brass color)

Stabilizers included 1×6.25u+7x2u (You only need to prepare switches and keycaps and cable to get a fully working keyboard)

Hotswap PCB led hole is most north facing.
Only Lshift \| Ralt RCtrl place is reversed to support 4 layouts in one PCB. 
PCB is fully programmable.There is 18 underglow RGB leds under PCB.

Please find the manual and software as below link:

Hotswap 96 QMK Manuals:drive.google.com/file/d/17u2PHPyHBGkvnsnkOrZEATtR9OkS_guG/view?usp=sharing

Hotswap 96 VIA Manuals:drive.google.com/file/d/18RPcr01UgIxzFhyI94FR7OwCYUdHYH_y/view?usp=sharing