Specs：

Mounting Style: Gasket
Material: 6063 Aluminum
Finish: Electrostatic Coating
Layout: 65% ANSI
Customization: VIA compatible
Colors: Pink
Switch Orientation: South-facing (Bottom LED slot)
Stabilizers: Plate-mounted Stabilizers
Typing Angle: 5 degrees
Dimensions: Approx. 332 * 125 * 32mm
Front Height: Approx. 22mm
Back Height: Approx. 32mm
Unbuilt Weight: Approx. 1.45KG
Built Weight: Approx. 1.8KG
Plate Foam (Mid Foam): Japanese Inoue Poron 3.5mm
Switch Pad: IPXE 0.5mm
Case foam: Poron 2.0mm

Firmware：

DIY kit Include：

Aluminum Case x1 set
FR4 plate x1
1.2mm flex-cut PCB x1
Daughter board and JST cable x1
Foam Kit x1
Plate mount stabilizers x1 set
USB-C cable x1
Battery cover x1
Screws x1 set
Switches puller x1
Keycaps puller x1
Silicone gasket x1 set
Metal Heart keycapx1
Star keycap x1

Ready to use kit Include：

Aluminum Case x1 set
FR4 plate x1
1.2mm flex-cut PCB x1
Daughter board and JST cable x1
Foam Kit x1
Plate mount stabilizers x1 set
USB-C cable x1
Battery cover x1
Screws x1 set
Switches puller x1
Keycaps puller x1
Silicone gasket x1 set
Metal Heart keycapx1
Star keycap x1
Mono switches

Features interchangeable screw-on toppers: a small star, a small heart, and a small pink ball.

The star and heart can be unscrewed and swapped with the pink ball, which is positioned on the side/rear of the keycap.

Please note: Due to the threading design/limitations, attaching the heart or star directly onto the top face is not the standard configuration and will require manual adjustment by the user.

Pictures